TECHNICAL SPECIFICATIONS

Standard Optional
Engine
 
Emissions Level
Gross horsepower hp (kW)
Rated speed rpm
No. of cylinders
Aspiration
Displacement cu.in. (L)
Alternator amps
Fuel Tank gal. (L)
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
T4B FinalT4B FinalT4B FinalT4B Final
24.7 (18.4)24.7 (18.4)24.7 (18.4)24.7 (18.4)
3000300030003000
3333
NaturalNaturalNaturalNatural
77.3 (1.26)77.3 (1.26)77.3 (1.26)77.3 (1.26)
50505050
6.6 (25)6.6 (25)6.6 (25)6.6 (25)
PTO
 
PTO horsepower hp (kW)
PTO speed rpm
PTO type
Mid-PTO
Mid-PTO speed rpm
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
17.2 (12.8)17.2 (12.8)17.2 (12.8)17.2 (12.8)
540540540540
Independent Electro-Hydraulic EngagementIndependent Electro-Hydraulic EngagementIndependent Electro-Hydraulic EngagementIndependent Electro-Hydraulic Engagement
StandardStandardStandardStandard
2500250025002500
Transmission
 
Type/Control - Choice 1
Type/Control - Choice 2
Maximum forward speed mph (kph)
Cruise control
Gear/shuttle type
Rear diff-lock engagement
Brake type
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
2 Range Hydrostatic/Dual Pedal2 Range Hydrostatic/Dual Pedal2 Range Hydrostatic/Dual Pedal-
N/AN/AN/A2 Range Hydrostatic/Dual Pedal
9.1 (14.7)9.1 (14.7)9.1 (14.7)N/A
Standard HSTStandard HSTStandard HST9.1 (14.7)
SynchroSynchroSynchroStandard HST
MechanicalMechanicalMechanicalMechanical
Wet, Multi-DiscWet, Multi-DiscWet, Multi-DiscWet, Multi-Disc
Hydraulics & 3-Point
 
Implement hydraulic flow gpm (lpm)
Steering hydraulic flow gpm (lpm)
Total Flow gpm (lpm)
Remote Valves
3-Point hitch
3PT lift capacity @ ball ends lb. (kg)
3PT lift capacity @ 24 in. (610 mm) behind ball ends lb. (kg)
3-Point linkage category
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
4.6 (17.4)4.6 (17.4)4.6 (17.4)4.6 (17.4)
2.1 (8)2.1 (8)2.1 (8)2.1 (8)
6.7 (25.4)6.7 (25.4)6.7 (25.4)6.7 (25.4)
1 Opt.1 Opt.1 Opt.1 Opt.
Chain Type Stabilizers /Fixed Link EndsChain Type Stabilizers /Fixed Link EndsChain Type Stabilizers /Fixed Link EndsChain Type Stabilizers /Fixed Link Ends
992 (450)992 (450)992 (450)992 (450)
728 (330)728 (330)728 (330)728 (330)
I I I
Front Axle Options
 
Two-Wheel Drive
Four-Wheel Drive
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
N/AN/AN/AN/A
StandardStandardStandardStandard
Dimensions/Weight
 
Wheelbase in. (mm)
Length in. (mm)
Width Width in. (mm)
Height (top of ROPS or Cab) in. (mm)
Weight in. (mm)
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
56.1 (1425)56.1 (1425)56.1 (1425)56.1 (1425)
97.4 (2473)97.4 (2473)97.4 (2473)97.4 (2473)
46.7 (1187)46.7 (1187)46.7 (1187)46.7 (1187)
87.4 (2220)87.4 (2220)87.4 (2220)87.4 (2220)
1444 (655)1444 (655)1444 (655)1444 (655)
100LC Loader
 
Lift Capacity (max height) lb. (kg)
Lift Height in. (mm)
Bucket
Weight lb. (kg)
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
1005 (456)1005 (456)1005 (456)-
72 (1829)72 (1829)72 (1829)-
50 inch/Pin on50 inch/Pin on50 inch/Pin on-
363 (165)363 (165)363 (165)-
160GMS Mower
 
Cutting Width
# of Blades in. (mm)
Weight
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
--60 inches60 inches
--33
--285 (129)285 (129)
905GBL Backhoe
 
Digging Depth in. (mm)
Bucket
Weight lb. (kg)
WM25S + 100LC LDRWM25S + 100LC LDR + 160GMS MMMWM25S + 100LC LDR + 905GBL BHWM25S + 160GMS MMM
-79.4 (2017)--
-9" --
-707 (321)--
Kongskilde:
Top Service:


New Holland Agriculture a brand of CNH Industrial ©
back to top