Large-Frame Telehandlers - Tier 4B

MANEUVER EASILY AROUND OBSTACLES

Four-wheel steering mode provides the large-frame LM telehandlers with a turning radius of just 12.8 feet, tight enough to maneuver around many obstacles. Crab steer mode creates the ability to move a load into or out of an area in a diagonal direction to easily maneuver around posts or immovable objects. Front-wheel steering works well for general use and transport applications, allowing you to operate the telehandler just like a standard tractor. The LM7.42 Elite also features auto wheel alignment when switching between all-wheel, crab and front-wheel steering.

BIGGER TIRES

Large-frame telehandlers are equipped with 460/70R24 tires as standard. These are the ideal size for general-purpose applications and yard work. Wider 500/70R24 are available to enhance flotation – a plus when hauling heavy bales across the field. Ground clearance at the lowest point under the axles is more than enough for your daily chores or working over rough terrain.

FULL-TIME 4WD AND AUTO TRACTION CONTROL

Full-time 4WD (four-wheel drive) and a front limited-slip differential are standard equipment. Developed specifically for telehandler applications, the differential directs up to 45% of available torque across the axle to ensure the wheel with the greatest traction always get power. A locking rear differential is standard on the LM7.42 Elite.

HYDRAULIC WET DISK BRAKES

Designed to offer long life with minimal maintenance, the sealed wet disc brakes in both of the LM telehandler axles are designed to operate at higher transport speeds. The parking brake* is activated via a dash-mounted switch. *SAHR system (Spring Applied Hydraulic Release).