TECHNICAL SPECIFICATIONS

Standard Optional
Cutterbar
 
Cutting width ft. in. (m)
Cutterbar model
Number of discs
Knives per disc
Disc speed @ 540 rpm PTO speed rpm
Tilt angle degrees
Flotation
Drive method
Cutting height in. (mm)
Cutting height w/optional high-stubble shoes in. (mm)
Cutting height w/optional adjustable shoes in. (mm)
Discbine® 209Discbine® 210
9’ 2” (2.8)10’ 4” (3.16)
MowMax™ Modular Cutterbar with ShockPRO™ hubsMowMax™ Modular Cutterbar with ShockPRO™ hubs
78
22
30003000
2° - 10°2° - 10°
Up & back, adjustable springsUp & back, adjustable springs
PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbarPTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
1.1-2.7 (29-68)Flail Tine: 1.1-2.7 (29-68) or Roll: .95-2.4 (24-60)
2.25-4.5 (58-115)2.25-4.5 (58-115)
2.25-4.5 (58-115)2.25-4.5 (58-115)
Roll Conditioners
 
Type
Length / Diameter in. (mm)
Drive method
Speed rpm
Conditioner roll tension adjustment
Conditioner gap adjustment
Discbine® 209Discbine® 210
Chevron intermeshing rubberChevron intermeshing rubber or steel rolls
90 (2286) / 10.4 (264)102 (2591) / 10.4 (264)
4 HB V-belt and enclosed gears4 HB V-belt and enclosed gears
647647
Single crankSingle crank
Adjustable drawbolt stop, each endAdjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
 
Type
Length / Diameter in. (mm)
Drive method
Speed rpm
Conditioner gap adjustment
Discbine® 209Discbine® 210
Flail rotor with 90 tapered flailsFlail rotor with 100 tapered flails
90 (2286) / 22 (560)102 (2591) / 22 (560)
4 HB v-belt4 HB v-belt
718 std. 1000 opt.718 std. 1000 opt.
Single crank adjustable rotor hoodSingle crank adjustable rotor hood
Crop Discharge
 
Swath width ft. (m)
Windrow width ft. (m)
Discbine® 209Discbine® 210
6 (1.83)7 (2.13)
3-6 (0.9-1.83)3-7 (0.9-2.13)
Driveline
 
Input speed rpm
Driveline protection
Secondary driveline
Discbine® 209Discbine® 210
540540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
Slip clutch and overrunning clutch assembly at rear of PTO shaftSlip clutch and overrunning clutch assembly at rear of PTO shaft
Non-CV drivelineDouble CV Driveline - Head repositionable under load
Tongue Options
 
Type
Hitch type
Discbine® 209Discbine® 210
Side-pull, straight tongueSide-pull, curved tongue
Drawbar with CV PTOStandard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch
Tractor Requirements
 
Minimum PTO power required hp (kW)
Hydraulic circuits required
Minimum relief pressure required psi (bar)
Drawbar
Swivel Hitch - Drawbar
Swivel Hitch - 2-Point
Electrical
Discbine® 209Discbine® 210
65 (49)80 (60)
22
1500 (103)1500 (103)
ASAE Category IIASAE Category II
ASAE Category II or III
ASAE Category II, III-N, or III
7-pin electrical connector for transport lights7-pin electrical connector for transport lights
Tires
 
Tubeless ag rib implement tires
Discbine® 209Discbine® 210
9.5L x 14L 6PRFlail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR
Transport Speed
 
Max road speed mph (kph)
Discbine® 209Discbine® 210
20 (32)20 (32)
Dimensions*
 
Width, transport ft. in. (m)
Width , operating ft. in. (m)
Length, transport ft. in. (m)
Length, operating ft. in. (m)
Height ft. in. (m)
Ground clearance with head fully raised in. (mm)
Discbine® 209Discbine® 210
9’ 11” (3.02)11’ 3” (3.42)
14’ 10” (4.52)16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped
Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)***Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)***
Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35)Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35)
17 (4.32)Flail Tine: 17 (4.32) or Roll: 18 (4.57)
Weights**
 
Operating weight lbs. (kg.)
Discbine® 209Discbine® 210
Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)***Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)***

— Not Available
*** Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
*** Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.
*** Weights & dimensions are with standard drawbar hitch. Add 150 lbs. (68 kg) & 2 ft. (.60) length for swivel hitch models.

Kongskilde:
Top Service:


New Holland Agriculture a brand of CNH Industrial ©
back to top