New Holland Balers BIGBALER PLUS Models

New Holland BigBaler 870 Plus Standard

Bale dimensions (cm)	80 / 70
MaxiSweep™ Pick-up width (DIN 11220) (m)	1.96
Feeder	2 packer forks 6 single tines
Tying system	Loop Master™ double knot type

New Holland BigBaler 870 Plus Standard
Standard Optional
Bale dimensions
Width / Height (cm)	80 / 70
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	80/109
PTO speed (rpm)	1000
Hydraulic remotes	2
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	1.96
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system	–
Knives options	–
Knife distance (mm)	–
Knife removal	–
Knife activation, in - out	–
Knife protection	–
Feeding system
Feeder	2 packer forks 6 single tines
Feeder protection	Slip clutch
Stuffer	Fork type with 4 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.25
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	4
Knotter fan type E	Electric
Number of knotter fans	2
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2568
Width (Single axle 710/40R22.5 tyres) (mm)	2604
Width (Tandem axle 520/50X17 tyres) (mm)	2398
Width (Tandem axle 600/50R22.5 tyres) (mm)	2568
Width (Large wheel tandem axle 600/50R22.5 tyres)	2562
Height (Single axle and Tandem axle) (mm)	3133
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 870 Plus Packer Cutter

Bale dimensions (cm)	80 / 70
MaxiSweep™ Pick-up width (DIN 11220) (m)	1.96
Feeder	3 packer forks 6 single tines
Tying system	Loop Master™ double knot type

New Holland BigBaler 870 Plus Packer Cutter
Standard Optional
Bale dimensions
Width / Height (cm)	80 / 70
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	85/116
PTO speed (rpm)	1000
Hydraulic remotes	3
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	1.96
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system
Knives options	6
Knife distance (mm)	114
Knife removal	From the front
Knife activation, in - out	Hydraulic
Knife protection	Individual springs
Feeding system
Feeder	3 packer forks 6 single tines
Feeder protection	Slip clutch
Stuffer	Fork type with 6 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.25
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	4
Knotter fan type E	Electric
Number of knotter fans	2
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pick-up light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2568
Width (Single axle 710/40R22.5 tyres) (mm)	2604
Width (Tandem axle 520/50X17 tyres) (mm)	2398
Width (Tandem axle 600/50R22.5 tyres) (mm)	2568
Width (Large wheel tandem axle 600/50R22.5 tyres)	2562
Height (Single axle and Tandem axle) (mm)	3133
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 870 Plus Cropcutter™

Bale dimensions (cm)	80 / 70
MaxiSweep™ Pick-up width (DIN 11220) (m)	1.96
Feeder	Rotor Width 800mm ”W”tine configuration
Tying system	Loop Master™ double knot type

New Holland BigBaler 870 Plus Cropcutter™
Standard Optional
Bale dimensions
Width / Height (cm)	80 / 70
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	100/136
PTO speed (rpm)	1000
Hydraulic remotes	3
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	1.96
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system
Knives options	9 or 19
Knife distance (mm)	78 / 39
Knife removal	Sliding knife drawer
Knife activation, in - out	Hydraulic
Knife protection	Individual springs
Feeding system
Feeder	Rotor Width 800mm ”W”tine configuration
Feeder protection	Cut-out clutch
Stuffer	Fork type with 4 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.25
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	4
Knotter fan type E	Electric
Number of knotter fans	2
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8315
Width (Single axle 600/50R22.5 tyres) (mm)	2568
Width (Single axle 710/40R22.5 tyres) (mm)	2604
Width (Tandem axle 520/50X17 tyres) (mm)	2398
Width (Tandem axle 600/50R22.5 tyres) (mm)	2568
Width (Large wheel tandem axle 600/50R22.5 tyres)	2562
Height (Single axle and Tandem axle) (mm)	3223
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 890 Plus Standard

Bale dimensions (cm)	80 / 90
MaxiSweep™ Pick-up width (DIN 11220) (m)	1.96
Feeder	2 packer forks 6 single tines
Tying system	Loop Master™ double knot type

New Holland BigBaler 890 Plus Standard
Standard Optional
Bale dimensions
Width / Height (cm)	80 / 90
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	80/109
PTO speed (rpm)	1000
Hydraulic remotes	2
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	1.96
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system	–
Knives options	–
Knife distance (mm)	–
Knife removal	–
Knife activation, in - out	–
Knife protection	–
Feeding system
Feeder	2 packer forks 6 single tines
Feeder protection	Slip clutch
Stuffer	Fork type with 4 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.25
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	4
Knotter fan type E	Electric
Number of knotter fans	2
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2568
Width (Single axle 710/40R22.5 tyres) (mm)	2604
Width (Tandem axle 520/50X17 tyres) (mm)	2398
Width (Tandem axle 600/50R22.5 tyres) (mm)	2568
Width (Large wheel tandem axle 600/50R22.5 tyres)	2562
Height (Single axle and Tandem axle) (mm)	3133
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 890 Plus Packer Cutter

Bale dimensions (cm)	80 / 90
MaxiSweep™ Pick-up width (DIN 11220) (m)	1.96
Feeder	3 packer forks 6 single tines
Tying system	Loop Master™ double knot type

New Holland BigBaler 890 Plus Packer Cutter
Standard Optional
Bale dimensions
Width / Height (cm)	80 / 90
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	85/116
PTO speed (rpm)	1000
Hydraulic remotes	3
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	1.96
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system
Knives options	6
Knife distance (mm)	114
Knife removal	From the front
Knife activation, in - out	Hydraulic
Knife protection	Individual springs
Feeding system
Feeder	3 packer forks 6 single tines
Feeder protection	Slip clutch
Stuffer	Fork type with 6 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.25
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	4
Knotter fan type E	Electric
Number of knotter fans	2
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2568
Width (Single axle 710/40R22.5 tyres) (mm)	2604
Width (Tandem axle 520/50X17 tyres) (mm)	2398
Width (Tandem axle 600/50R22.5 tyres) (mm)	2568
Width (Large wheel tandem axle 600/50R22.5 tyres)	2562
Height (Single axle and Tandem axle) (mm)	3133
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 890 Plus Cropcutter™

Bale dimensions (cm)	80 / 90
MaxiSweep™ Pick-up width (DIN 11220) (m)	1.96
Feeder	Rotor Width 800mm ”W”tine configuration
Tying system	Loop Master™ double knot type

New Holland BigBaler 890 Plus Cropcutter™
Standard Optional
Bale dimensions
Width / Height (cm)	80 / 90
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	100/136
PTO speed (rpm)	1000
Hydraulic remotes	3
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	1.96
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system
Knives options	9 or 19
Knife distance (mm)	78 / 39
Knife removal	Sliding knife drawer
Knife activation, in - out	Hydraulic
Knife protection	Individual springs
Feeding system
Feeder	Rotor Width 800mm ”W”tine configuration
Feeder protection	Cut-out clutch
Stuffer	Fork type with 4 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.25
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	4
Knotter fan type E	Electric
Number of knotter fans	2
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2568
Width (Single axle 710/40R22.5 tyres) (mm)	2604
Width (Tandem axle 520/50X17 tyres) (mm)	2398
Width (Tandem axle 600/50R22.5 tyres) (mm)	2568
Width (Large wheel tandem axle 600/50R22.5 tyres)	2562
Height (Single axle and Tandem axle) (mm)	3223
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 1270 Plus Standard

Bale dimensions (cm)	120 / 70
MaxiSweep™ Pick-up width (DIN 11220) (m)	2.23
Feeder	3 packer forks 9 single tines
Tying system	Loop Master™ double knot type

New Holland BigBaler 1270 Plus Standard
Standard Optional
Bale dimensions
Width / Height (cm)	120 / 70
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	90/122
PTO speed (rpm)	1000
Hydraulic remotes	2
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	2.23
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system	–
Knives options	–
Knife distance (mm)	–
Knife removal	–
Knife activation, in - out	–
Knife protection	–
Feeding system
Feeder	3 packer forks 9 single tines
Feeder protection	Slip clutch
Stuffer	Fork type with 6 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.3
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	6
Knotter fan type E	Electric
Number of knotter fans	3
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2948
Width (Single axle 710/40R22.5 tyres) (mm)	2984
Width (Tandem axle 520/50X17 tyres) (mm)	2782
Width (Tandem axle 600/50R22.5 tyres) (mm)	2948
Width (Large wheel tandem axle 600/50R22.5 tyres)	2946
Height (Single axle and Tandem axle) (mm)	3133
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 1270 Plus Cropcutter™

Bale dimensions (cm)	120 / 70
MaxiSweep™ Pick-up width (DIN 11220) (m)	2.35
Feeder	Rotor Width 1200mm ”W”tine configuration
Tying system	Loop Master™ double knot type

New Holland BigBaler 1270 Plus Cropcutter™
Standard Optional
Bale dimensions
Width / Height (cm)	120 / 70
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	110/150
PTO speed (rpm)	1000
Hydraulic remotes	3
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	2.35
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system
Knives options	15 or 29
Knife distance (mm)	78 / 39
Knife removal	Sliding knife drawer
Knife activation, in - out	Hydraulic
Knife protection	Individual springs
Feeding system
Feeder	Rotor Width 1200mm ”W”tine configuration
Feeder protection	Cut-out clutch
Stuffer	Fork type with 6 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.3
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	6
Knotter fan type E	Electric
Number of knotter fans	3
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8315
Width (Single axle 600/50R22.5 tyres) (mm)	2948
Width (Single axle 710/40R22.5 tyres) (mm)	2984
Width (Tandem axle 520/50X17 tyres) (mm)	2782
Width (Tandem axle 600/50R22.5 tyres) (mm)	2948
Width (Large wheel tandem axle 600/50R22.5 tyres)	2946
Height (Single axle and Tandem axle) (mm)	3223
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 1290 Plus Standard

Bale dimensions (cm)	120 / 90
MaxiSweep™ Pick-up width (DIN 11220) (m)	2.23
Feeder	3 packer forks 9 single tines
Tying system	Loop Master™ double knot type

New Holland BigBaler 1290 Plus Standard
Standard Optional
Bale dimensions
Width / Height (cm)	120 / 90
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	95/130
PTO speed (rpm)	1000
Hydraulic remotes	2
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	2.23
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system	–
Knives options	–
Knife distance (mm)	–
Knife removal	–
Knife activation, in - out	–
Knife protection	–
Feeding system
Feeder	3 packer forks 9 single tines
Feeder protection	Slip clutch
Stuffer	Fork type with 6 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.3
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	6
Knotter fan type E	Electric
Number of knotter fans	3
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8259
Width (Single axle 600/50R22.5 tyres) (mm)	2948
Width (Single axle 710/40R22.5 tyres) (mm)	2984
Width (Tandem axle 520/50X17 tyres) (mm)	2782
Width (Tandem axle 600/50R22.5 tyres) (mm)	2948
Width (Large wheel tandem axle 600/50R22.5 tyres)	2946
Height (Single axle and Tandem axle) (mm)	3133
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

New Holland BigBaler 1290 Plus Cropcutter™

Bale dimensions (cm)	120 / 90
MaxiSweep™ Pick-up width (DIN 11220) (m)	2.35
Feeder	Rotor Width 1200mm ”W”tine configuration
Tying system	Loop Master™ double knot type

New Holland BigBaler 1290 Plus Cropcutter™
Standard Optional
Bale dimensions
Width / Height (cm)	120 / 90
Minimum / Maximum length (cm)	100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]	118/160
PTO speed (rpm)	1000
Hydraulic remotes	3
Main Drive
Gearbox	Enclosed oil immersed triple reduction gearbox
Protection	Shear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)	2.35
Roller windguard
Feed assist auger
Tine diameter (mm)	5.5
Flotation	Adjustable spring
Castering pickup gauge wheels
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)	2
CropCutter™ system
CropCutter™ system
Knives options	15 or 29
Knife distance (mm)	78 / 39
Knife removal	Sliding knife drawer
Knife activation, in - out	Hydraulic
Knife protection	Individual springs
Feeding system
Feeder	Rotor Width 1200mm ”W”tine configuration
Feeder protection	Cut-out clutch
Stuffer	Fork type with 6 tines
Stuffer protection	Shearbolt
Pre-compression chamber, volume (m³)	0.3
SmartFill™ system
Plunger
Speed (Strokes/min)	48
Length of stroke (mm)	710
Tying system
Type	Loop Master™ double knot type
Twine type	110-150M/kg plast.
Number of twines	6
Knotter fan type E	Electric
Number of knotter fans	3
Knotter function alert	IntelliView™ monitor and visual
Knotter lubrication	Grease
Twine ball capacity	32
Bale density system
Proportional 3-way control	IntelliView™ monitor controlled
Electronic control system
ISO 11783 Connection Ready
IntelliView™ IV monitor
IntelliCruise™ system	*
PLM® GPS data logging
Lights
Road lights
Light package I	Standard: 1 x service light LHS stuffer, 1 x portable light, 2 x working lights at rear machine
Light package II	Optional: 1 x service light RHS stuffer, 2 x knotter lights + 1 x needle light, 2 x pickup light LED
Axles
Single axle (Tyre size)	600/50R22.5 or 650/55R26.5** or 710/40R22.5
Tandem axle (Tyre size)	520/50X17
Tandem axle with Auto-Steer system (Tyre size)	520/50X17
Large wheel tandem axle with Auto-Steer system (Tyre size)	560/45R22.5 or 600/50R22.5 or 620/40R22.5*
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Hydraulic brakes / Pneumatic brakes (kph)	32 / 40, 50 or 60****
Baler dimensions
Length chute closed (single piece) (mm)	8315
Width (Single axle 600/50R22.5 tyres) (mm)	2948
Width (Single axle 710/40R22.5 tyres) (mm)	2984
Width (Tandem axle 520/50X17 tyres) (mm)	2782
Width (Tandem axle 600/50R22.5 tyres) (mm)	2948
Width (Large wheel tandem axle 600/50R22.5 tyres)	2946
Height (Single axle and Tandem axle) (mm)	3223
Standard equipment
Standard equipment	Roller windguard, SmartFill™ II system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights, Electronic Bale Length system
Optional equipment
Optional equipment	Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Abrasive option rotor, CropSaver liquid preservative, rear bumper

BIGBALER PLUS Balers

Gallery

MODELS

New Holland BigBaler 870 Plus Standard

New Holland BigBaler 870 Plus Packer Cutter

New Holland BigBaler 870 Plus Cropcutter™

New Holland BigBaler 890 Plus Standard

New Holland BigBaler 890 Plus Packer Cutter

New Holland BigBaler 890 Plus Cropcutter™

New Holland BigBaler 1270 Plus Standard

New Holland BigBaler 1270 Plus Cropcutter™

New Holland BigBaler 1290 Plus Standard

New Holland BigBaler 1290 Plus Cropcutter™