The era of intelligent balers

• The best-in-class SmartFill™ bale direction sensor ensures that every bale is perfectly uniform
• A network of sensors are located at the entry to the pre-compression chamber and record the intake crop flow
• If one-sided crop entry is detected, the operator is informed via the IntelliView™ monitor to drive either more to the right or to the left of the swath, to maintain smooth feeding

Read More

IntelliCruise™ system. Optimised capacity. Ultimate uniformity.

The IntelliCruise™ feature controls the tractor’s forward speed through ISOBUS Class III technology, increasing productivity, improving operator comfort, improving fuel savings and optimising feeding rate in varying field and crop conditions. This system IntelliCruise has two running modes.
• IntelliCruise™ technology enables
• Up to 9% more throughput
• Up to 4% fuel savings
• Reduced operator fatigue

Charge Control mode
• In Charge Control mode, available on CropCutter™ models only, the tractor speed is adapted to achieve optimum capacity by using sensor paddles which measure both the throughput of crop fed into the stuffer feeder channel, as well as the time to fill it to ensure the optimum tractor speed is maintained

Slice Control mode
• In Slice Control mode, available on both the Standard and CropCutter™ models, the tractor’s speed is adjusted according to bale slice thickness and the system will strive to obtain the exact amount of slices defined by the operator

On the go bale weighing

• The ActiveWeigh™ bale weighing system uses integrated sensors in the bale discharge chute to register the weight of the bale at the point at which it becomes free from the chute
• This system is independent of bale length, field conditions and baler movement
• All information, including single bale weight, average weight, total weight and tonnes per hour are displayed on the IntelliView™ monitor with accuracy of ± 2%

Read More

New Holland Agriculture a brand of CNH Industrial ©
back to top