Max. power ISO TR14396 - ECE R120 @ 2000rpm [kW/hp(CV)]368/500
Max. torque ISO 14396 - ECE R120 @ 1500rpm (Nm)2145
Cutterhead diameter (max / min) (mm)710mm / 690mm
Variflow™ systemShift between crops in under two minutes

Standard  Optional 
Engine ModelFPT Cursor 13*
Emission LevelTier 3
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemUnit injectors
Rated power ISO TR14396 - ECE R120 @ 2100rpm [kW/hp(CV)]343/466
Max. power ISO TR14396 - ECE R120 @ 2000rpm [kW/hp(CV)]368/500
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)1643
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)2091
Max. torque ISO 14396 - ECE R120 @ 1500rpm (Nm)2145
Torque rise (2100 to 1500rpm) (%)38
Torque rise (2100 to 1800rpm) (%)27
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1040
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900mm
Cutterhead cylinder width (mm)884mm
Cutterhead diameter (max / min) (mm)710mm / 690mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Automatic knife sharpening system22600
Cuts per minute (2 x 20 knives) (c/min)2 - 13
Automatic knife sharpening system with reverse drive
Length of cut range (2 x 20 knives) (mm)
Adjust-O-Matic™ shearbar setting
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)200 / 250
Two-roll system with saw tooth profile (teeth)77 / 99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential
22% speed differential
30% speed differential (only with 99/126 teeth combination)
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)
Remote electro-hydraulic clearance control (250mm rolls)
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual air conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Full Precision farming package including - Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight** (kg)12750

Standard Optional – Not available
* Developed by FPT Industrial
** Grass configuration

CNH Industrial:

New Holland Agriculture a brand of CNH Industrial ©
back to top