MODELS

FR550

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]370/503
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2316
Torque rise (2100 to 1500rpm) %38


Standard  Optional 
FR550
Engine
EngineFPT Cursor 13*
Engine configuration and number of cylindersIn-line 6
Capacity liters12.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]370/503
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1682
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2247
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2316
Torque rise (2100 to 1500rpm) %38
Torque rise (2100 to 1700rpm) %34
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)1200
AdBlue capacity gal. (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) (mm)6 - 33
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) (mm)5 - 26
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) (mm)4 - 22
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop Processor
Roll Width (mm)750
Roll Diameter (mm)250
Cab Controled Gap
DuraCracker HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height (mm)6400
Rotation angle degree210
Spout extension (10-row corn header) (mm)720
Spout extension (12-row corn header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah2 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)40
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
LED lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)395
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** (kg)13100

FR650

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]440/598
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2751
Torque rise (2100 to 1500rpm) %37


Standard  Optional 
FR650
Engine
EngineFPT Cursor 16*
Engine configuration and number of cylindersIn-line 6
Capacity liters15.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]440/598
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2001
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2696
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2751
Torque rise (2100 to 1500rpm) %37
Torque rise (2100 to 1700rpm) %35
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)1200
AdBlue capacity gal. (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)711 / 690
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) (mm)6 - 33
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) (mm)5 - 26
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) (mm)4 - 22
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop Processor
Roll Width (mm)750
Roll Diameter (mm)250
Cab Controled Gap
DuraCracker HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height (mm)6400
Rotation angle degree210
Spout extension (10-row corn header) (mm)720
Spout extension (12-row corn header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)40
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
LED lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)395
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** (kg)13550

FR780

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]530/721
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)3323
Torque rise (2100 to 1500rpm) %38


Standard  Optional 
FR780
Engine
EngineFPT Cursor 16*
Engine configuration and number of cylindersIn-line 6
Capacity liters15.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]530/721
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2410
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)3202
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)3323
Torque rise (2100 to 1500rpm) %38
Torque rise (2100 to 1700rpm) %33
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)1200
AdBlue capacity gal. (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)712/ 690
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) (mm)6 - 33
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) (mm)5 - 26
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) (mm)4 - 22
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop Processor
Roll Width (mm)750
Roll Diameter (mm)250
Cab Controled Gap
DuraCracker HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height (mm)6400
Rotation angle degree210
Spout extension (10-row corn header) (mm)720
Spout extension (12-row corn header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)40
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
LED lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)395
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** (kg)13650

FR920

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]610/830
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]670/911
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)4095
Torque rise (2100 to 1500rpm) %48


Standard  Optional 
FR920
Engine
EngineFPT V20
Engine configuration and number of cylindersV8
Capacity liters20.1
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]610/830
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]670/911
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2774
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)3999
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)4095
Torque rise (2100 to 1500rpm) %48
Torque rise (2100 to 1700rpm) %44
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)1200
AdBlue capacity gal. (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)713 / 690
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min
Length of cut range (2x8 knives) (mm)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) (mm)5 - 26
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) (mm)4 - 22
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop Processor
Roll Width (mm)750
Roll Diameter (mm)250
Cab Controled Gap
DuraCracker HDCP
RollsHD Sawteeth, 100/130 teeth, 30% Differential
DuraShredder HDCP
RollsHD Sawteeth, 100/130 teeth, 30% Differential
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height (mm)6400
Rotation angle degree210
Spout extension (10-row corn header) (mm)720
Spout extension (12-row corn header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah4 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)40
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
LED lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)395
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** (kg)15800

Standard Optional – Not available
* Developed by FPT Industrial
** Engine speed @ 1800rpm
*** Biodiesel blend must fully comply with the latest fuel specification EN14214:2009 and operation is in accordance with operator manual guidelines
**** Grass configuration
*****Traction wheels other than those mentioned are also available: 800/70R32, 800/65R32. Max width: 800/70R32 = 3,35m; 900/60R32 = 3,48m; 710/70R42 = 3.19m; 80/70R38 = 3.29m.



New Holland Agriculture a brand of CNH Industrial ©
back to top