HAYBINE® MOWER CONDITIONERS

THE ORIGINAL IS STILL THE BEST

TECHNICAL SPECIFICATIONS

Standard Optional
Cutting width
 
Cutting width, mm (ft. in.)
488H7150 HS14H7150 HS16H7150 HS18
2819mm (9’ 3”)4343mm (14' 3")4953mm (16' 3")5563mm (18' 3")
Drive
 
Drive
488H7150 HS14H7150 HS16H7150 HS18
540 rpm PTO1000 rpm PTO1000 rpm PTO1000 rpm PTO
Tractor Hookup
 
Tractor Hookup
488H7150 HS14H7150 HS16H7150 HS18
Equal-angle PTONew patented, tongue-mounted, swiveling pumpNew patented, tongue-mounted, swiveling pumpNew patented, tongue-mounted, swiveling pump
Minimum tractor requirement
 
Minimum tractor requirement
488H7150 HS14H7150 HS16H7150 HS18
35hp (26.1kw)/ One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)70hp (52kw)/ Two remote hydraulic circuits required, capable of 1750 psi (12066 kpa)70hp (52kw)/ Two remote hydraulic circuits required, capable of 1750 psi (12066 kpa)70hp (52kw)/ Two remote hydraulic circuits required, capable of 1750 psi (12066 kpa)
Reel
 
Reel
Peripheral speed, kph (mph)
Speed Adjustment
Diameter (maximum), mm (ft. in.)
Adjustments
Drive
Bushings/bearings, mm (in.)
488H7150 HS14H7150 HS16H7150 HS18
4-tine bar5-bat, all steel, segmented tine bars and full-flex tines5-bat, all steel, segmented tine bars and full-flex tines5-bat, all steel, segmented tine bars and full-flex tines
10.5 to 13.8 (6.5 to 8.6)10.46 to 17.54 (6.5 to 10.9)10.46 to 17.54 (6.5 to 10.9)10.46 to 17.54 (6.5 to 10.9)
Variable sheaveFore/aft, vertical, pitchFore/aft,vertical, pitchFore/aft, vertical, pitch
1073mm (3’ 6-1⁄4”)1067mm (3’ 6”)1067mm (3’ 6”)1067mm (3’ 6”)
Fore/aft, vertical, pitchVariable sheaveVariable sheaveVariable sheave
Belt and chainBelt and chainBelt and chainBelt and chain
31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations
Cutterbar
 
Cutterbar
Knives
Guards
Cutting height, mm (in.)
Cutting angle, degrees
Hydraulic tilt
Guard points max lift, mm (in.)
Skid shoes
Sickle drive
Sickle speed, spm
Sickle stroke, mm (in.)
488H7150 HS14H7150 HS16H7150 HS18
One assemblyTwo opposing assemblies, timed, dual, counter-stroking sicklesTwo opposing assemblies, timed, dual, counter-stroking sicklesTwo opposing assemblies, timed, dual, counter-stroking sickles
Bolted, over-serrated sections, adjustable hold-downsBolted, over-serrated sections, adjustable hold-downsBolted, over-serrated sections, adjustable hold-downsBolted, over-serrated sections, adjustable hold-downs
Twin, forged steel, double-hardenedTwin, forged steel, double-hardenedTwin, forged steel, double-hardenedTwin, forged steel, double-hardened
32 to 108mm (1.25 to 4.25)30 to 157mm (1.2 to 6.2)30 to 157mm(1.2 to 6.2)30 to 157m(1.2 to 6.2)
-7 or -10-6 to -12-6 to -12-6 to -12
StandardStandardStandard
483mm (19)635mm (25)635mm (25)635mm (25)
2444
wobble jointOpen, dual wobbleOpen, dual wobbleOpen, dual wobble
1632181018101810
76mm (3)76mm (3)76mm (3)76mm (3)
Auger
 
Auger
Floating range, mm (in.)
Speed, rpm
488H7150 HS14H7150 HS16H7150 HS18
Single, full floating, (20-in) 508mm auger with (5 in) 178mm flightingSingle, full floating, (20-in) 508mm auger with (5 in) 178mm flightingSingle, full floating, (20-in) 508mm auger with (5 in) 178mm flighting
50.8mm (2)50.8mm (2)50.8mm (2)
287287287
Conditioner
 
Conditioner
Roll length (crushing area), mm (in.)
Roll diameter, mm (in.)
Drives
Speed, rpm
Pressure, N/mm (lbs./in.)
Roll gap adjustment
Material discharge, mm (in.)
488H7150 HS14H7150 HS16H7150 HS18
Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustmentChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustmentChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustmentChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
2591mm (102)2591mm (102)2591mm (102)2591mm (102)
264mm (10-3⁄8)263.5mm (10.375)263.5mm (10.375)263.5mm (10.375)
Individual, #50 roller chainSpur drive gearbox and PTOsSpur drive gearbox and PTOsSpur drive gearbox and PTOs
637717717717
0.3 to 6.6 (2 to 38)0.3 to 6.6 (2 to 38)0.3 to 6.6 (2 to 38)0.3 to 6.6 (2 to 38)
ShimsWrenchWrenchWrench
Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)
Operating speed
 
Operating speed, ph (mph)
Max safe transport speed, kph (mph)
488H7150 HS14H7150 HS16H7150 HS18
13 (up to 8)13 (up to 8)13 (up to 8)13 (up to 8)
32 (20)32 (20)32 (20)32 (20)
Tyres
 
Tyres
488H7150 HS14H7150 HS16H7150 HS18
27 x 9.50-15 flotation31 x 13.50-15, 8PR agricultural Implement31 x 13.50-15, 8PR agricultural Implement31 x 13.50-15, 8PR agricultural Implement
Hydraulic cylindres
 
Hydraulic cylindres
488H7150 HS14H7150 HS16H7150 HS18
Optional header lift/ Rope controlStandard header lift/ Standard tongue shiftStandard header lift/ Standard tongue shiftStandard header lift/ Standard tongue shift
Dimensions
 
Overall width, operating, mm (ft. in.)
Overall width, transport, mm (ft. in.)
Overall length, transport, mm (ft. in.)
Overall height, operating, mm (ft. in.)
Overall height, raised, mm (ft. in.)
488H7150 HS14H7150 HS16H7150 HS18
4172mm (13’8-1⁄4”)4953mm (16'3")5563mm (18' 3")6172mm (20’ 3")
3708mm (12’2”)4953mm (16’ 3”)5563mm (18’ 3”)6172mm (20’ 3”)
4064mm (13’4”)7900mm (25’ 11”)7900mm (25’ 11”)9020mm (29’ 7”)
1067mm (3’ 6”)1850mm (6’ 1”)1850mm (6’ 1”)1850mm (6’ 1”)
1702mm (5’ 7”)2030mm (6’ 8”)2030mm (6’ 8”)2030mm (6’ 8”)
Weight
 
Weight, kg (lbs.)
488H7150 HS14H7150 HS16H7150 HS18
1253 (2763)3096 (6,825)3196 (7,045)3332 (7,345)

See product brochure for full specifications and options.



New Holland Agriculture a brand of CNH Industrial ©
back to top