HAYBINE® MOWER CONDITIONERS

THE ORIGINAL IS STILL THE BEST

MODELS

488

Cutting width, mm (ft. in.)2819mm (9’ 3”)
Roll diameter, mm (in.)264mm (10-3⁄8)
Operating speed, ph (mph)13 (up to 8)
Weight, kg (lbs.)1253 (2763)


Standard  Optional 
488
Cutting width
Cutting width, mm (ft. in.)2819mm (9’ 3”)
Drive
Drive540 rpm PTO
Tractor Hookup
Tractor HookupEqual-angle PTO
Minimum tractor requirement
Minimum tractor requirement35hp (26.1kw)/ One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)
Reel
Reel4-tine bar
Peripheral speed, kph (mph)10.5 to 13.8 (6.5 to 8.6)
Speed AdjustmentVariable sheave
Diameter (maximum), mm (ft. in.)1073mm (3’ 6-1⁄4”)
AdjustmentsFore/aft, vertical, pitch
DriveBelt and chain
Bushings/bearings, mm (in.)31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations
Cutterbar
CutterbarOne assembly
KnivesBolted, over-serrated sections, adjustable hold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, mm (in.)32 to 108mm (1.25 to 4.25)
Cutting angle, degrees-7 or -10
Hydraulic tilt
Guard points max lift, mm (in.)483mm (19)
Skid shoes2
Sickle drivewobble joint
Sickle speed, spm1632
Sickle stroke, mm (in.)76mm (3)
Auger
Auger
Floating range, mm (in.)
Speed, rpm
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), mm (in.)2591mm (102)
Roll diameter, mm (in.)264mm (10-3⁄8)
DrivesIndividual, #50 roller chain
Speed, rpm637
Pressure, N/mm (lbs./in.)0.3 to 6.6 (2 to 38)
Roll gap adjustmentShims
Material discharge, mm (in.)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)
Operating speed
Operating speed, ph (mph)13 (up to 8)
Max safe transport speed, kph (mph)32 (20)
Tyres
Tyres27 x 9.50-15 flotation
Hydraulic cylindres
Hydraulic cylindresOptional header lift/ Rope control
Dimensions
Overall width, operating, mm (ft. in.)4172mm (13’8-1⁄4”)
Overall width, transport, mm (ft. in.)3708mm (12’2”)
Overall length, transport, mm (ft. in.)4064mm (13’4”)
Overall height, operating, mm (ft. in.)1067mm (3’ 6”)
Overall height, raised, mm (ft. in.)1702mm (5’ 7”)
Weight
Weight, kg (lbs.)1253 (2763)

H7150 HS14

Cutting width, mm (ft. in.)4343mm (14' 3")
Roll diameter, mm (in.)263.5mm (10.375)
Operating speed, ph (mph)13 (up to 8)
Weight, kg (lbs.)3096 (6,825)


Standard  Optional 
H7150 HS14
Cutting width
Cutting width, mm (ft. in.)4343mm (14' 3")
Drive
Drive1000 rpm PTO
Tractor Hookup
Tractor HookupNew patented, tongue-mounted, swiveling pump
Minimum tractor requirement
Minimum tractor requirement70hp (52kw)/ Two remote hydraulic circuits required, capable of 1750 psi (12066 kpa)
Reel
Reel5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, kph (mph)10.46 to 17.54 (6.5 to 10.9)
Speed AdjustmentFore/aft, vertical, pitch
Diameter (maximum), mm (ft. in.)1067mm (3’ 6”)
AdjustmentsVariable sheave
DriveBelt and chain
Bushings/bearings, mm (in.)31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable hold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, mm (in.)30 to 157mm (1.2 to 6.2)
Cutting angle, degrees-6 to -12
Hydraulic tiltStandard
Guard points max lift, mm (in.)635mm (25)
Skid shoes4
Sickle driveOpen, dual wobble
Sickle speed, spm1810
Sickle stroke, mm (in.)76mm (3)
Auger
AugerSingle, full floating, (20-in) 508mm auger with (5 in) 178mm flighting
Floating range, mm (in.)50.8mm (2)
Speed, rpm287
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), mm (in.)2591mm (102)
Roll diameter, mm (in.)263.5mm (10.375)
DrivesSpur drive gearbox and PTOs
Speed, rpm717
Pressure, N/mm (lbs./in.)0.3 to 6.6 (2 to 38)
Roll gap adjustmentWrench
Material discharge, mm (in.)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)
Operating speed
Operating speed, ph (mph)13 (up to 8)
Max safe transport speed, kph (mph)32 (20)
Tyres
Tyres31 x 13.50-15, 8PR agricultural Implement
Hydraulic cylindres
Hydraulic cylindresStandard header lift/ Standard tongue shift
Dimensions
Overall width, operating, mm (ft. in.)4953mm (16'3")
Overall width, transport, mm (ft. in.)4953mm (16’ 3”)
Overall length, transport, mm (ft. in.)7900mm (25’ 11”)
Overall height, operating, mm (ft. in.)1850mm (6’ 1”)
Overall height, raised, mm (ft. in.)2030mm (6’ 8”)
Weight
Weight, kg (lbs.)3096 (6,825)

H7150 HS16

Cutting width, mm (ft. in.)4953mm (16' 3")
Roll diameter, mm (in.)263.5mm (10.375)
Operating speed, ph (mph)13 (up to 8)
Weight, kg (lbs.)3196 (7,045)


Standard  Optional 
H7150 HS16
Cutting width
Cutting width, mm (ft. in.)4953mm (16' 3")
Drive
Drive1000 rpm PTO
Tractor Hookup
Tractor HookupNew patented, tongue-mounted, swiveling pump
Minimum tractor requirement
Minimum tractor requirement70hp (52kw)/ Two remote hydraulic circuits required, capable of 1750 psi (12066 kpa)
Reel
Reel5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, kph (mph)10.46 to 17.54 (6.5 to 10.9)
Speed AdjustmentFore/aft,vertical, pitch
Diameter (maximum), mm (ft. in.)1067mm (3’ 6”)
AdjustmentsVariable sheave
DriveBelt and chain
Bushings/bearings, mm (in.)31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable hold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, mm (in.)30 to 157mm(1.2 to 6.2)
Cutting angle, degrees-6 to -12
Hydraulic tiltStandard
Guard points max lift, mm (in.)635mm (25)
Skid shoes4
Sickle driveOpen, dual wobble
Sickle speed, spm1810
Sickle stroke, mm (in.)76mm (3)
Auger
AugerSingle, full floating, (20-in) 508mm auger with (5 in) 178mm flighting
Floating range, mm (in.)50.8mm (2)
Speed, rpm287
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), mm (in.)2591mm (102)
Roll diameter, mm (in.)263.5mm (10.375)
DrivesSpur drive gearbox and PTOs
Speed, rpm717
Pressure, N/mm (lbs./in.)0.3 to 6.6 (2 to 38)
Roll gap adjustmentWrench
Material discharge, mm (in.)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)
Operating speed
Operating speed, ph (mph)13 (up to 8)
Max safe transport speed, kph (mph)32 (20)
Tyres
Tyres31 x 13.50-15, 8PR agricultural Implement
Hydraulic cylindres
Hydraulic cylindresStandard header lift/ Standard tongue shift
Dimensions
Overall width, operating, mm (ft. in.)5563mm (18' 3")
Overall width, transport, mm (ft. in.)5563mm (18’ 3”)
Overall length, transport, mm (ft. in.)7900mm (25’ 11”)
Overall height, operating, mm (ft. in.)1850mm (6’ 1”)
Overall height, raised, mm (ft. in.)2030mm (6’ 8”)
Weight
Weight, kg (lbs.)3196 (7,045)

H7150 HS18

Cutting width, mm (ft. in.)5563mm (18' 3")
Roll diameter, mm (in.)263.5mm (10.375)
Operating speed, ph (mph)13 (up to 8)
Weight, kg (lbs.)3332 (7,345)


Standard  Optional 
H7150 HS18
Cutting width
Cutting width, mm (ft. in.)5563mm (18' 3")
Drive
Drive1000 rpm PTO
Tractor Hookup
Tractor HookupNew patented, tongue-mounted, swiveling pump
Minimum tractor requirement
Minimum tractor requirement70hp (52kw)/ Two remote hydraulic circuits required, capable of 1750 psi (12066 kpa)
Reel
Reel5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, kph (mph)10.46 to 17.54 (6.5 to 10.9)
Speed AdjustmentFore/aft, vertical, pitch
Diameter (maximum), mm (ft. in.)1067mm (3’ 6”)
AdjustmentsVariable sheave
DriveBelt and chain
Bushings/bearings, mm (in.)31.75mm (1.25) bearing w/collar at cam end and bushings at all other locations
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable hold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, mm (in.)30 to 157m(1.2 to 6.2)
Cutting angle, degrees-6 to -12
Hydraulic tiltStandard
Guard points max lift, mm (in.)635mm (25)
Skid shoes4
Sickle driveOpen, dual wobble
Sickle speed, spm1810
Sickle stroke, mm (in.)76mm (3)
Auger
AugerSingle, full floating, (20-in) 508mm auger with (5 in) 178mm flighting
Floating range, mm (in.)50.8mm (2)
Speed, rpm287
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), mm (in.)2591mm (102)
Roll diameter, mm (in.)263.5mm (10.375)
DrivesSpur drive gearbox and PTOs
Speed, rpm717
Pressure, N/mm (lbs./in.)0.3 to 6.6 (2 to 38)
Roll gap adjustmentWrench
Material discharge, mm (in.)Adjustable gate for swath, windrow or intermediate widths 965 to 2438 (38 to 96)
Operating speed
Operating speed, ph (mph)13 (up to 8)
Max safe transport speed, kph (mph)32 (20)
Tyres
Tyres31 x 13.50-15, 8PR agricultural Implement
Hydraulic cylindres
Hydraulic cylindresStandard header lift/ Standard tongue shift
Dimensions
Overall width, operating, mm (ft. in.)6172mm (20’ 3")
Overall width, transport, mm (ft. in.)6172mm (20’ 3”)
Overall length, transport, mm (ft. in.)9020mm (29’ 7”)
Overall height, operating, mm (ft. in.)1850mm (6’ 1”)
Overall height, raised, mm (ft. in.)2030mm (6’ 8”)
Weight
Weight, kg (lbs.)3332 (7,345)

See product brochure for full specifications and options.



New Holland Agriculture a brand of CNH Industrial ©
back to top